the not-so-dainty jewelry holder

If you are anything like me, you like your jewelry over-sized. I have quite the jewelry collection these days, and sadly, no where to hang them up where they are free from tangles and easily displayed for my perusal. What I needed was a jewelry holder as big and as bold as my favorite Anthro necklaces. Voila!

After dreaming up a number of different ideas for a jewelry holder that would be both stylish and capable of holding at least 10 lbs, I went to the thrift store for a scouting trip.
¬†At the store, I found this used picture. The frame measures just under 3’x3′, so I thought it could be big enough to handle my project. I bought the picture for $5 and brought it to the hardware store. The frame was a little dinged up, and I would have considered refinishing, but once I discovered it was actually particle board, painting became the necessary step.

At the hardware store, I found these molding strips. You could just use a thin plywood, but the molding had a nice beveled edge. I measured the inside of the frame, and cut the strips accordingly. (Did you know they have stations with saws where you can cut the wood yourself in the store! Awesome!)

I picked my color scheme to match my room. Since the piece is so big, I figured it could double as wall art (which my bedroom desperately needs… more on that later. I found a patterned wrapping paper I really enjoyed at a local shop called the Paper Merchant that sells specialty papers, then took the paper to Joanns for a perfect color match in an acrylic paint. I went with a matte finish, but you could go for gloss if you wanted to!

Once the frame and molding strips were painted blue, I measured and cut my wrapping paper to fit inside the frame. I also decided what heights to put the molding strips at and marked the spots on the picture with a pencil. I decided (after some epic failing) to cut the paper into 3 pieces and put each in separately. There was some slight gaping between the existing picture and the frame under which I was able to slide the wrapping paper for a more secure fit and total coverage.

I decided to use an acid-free double stick tape (after staring at the adhesive aisle for about 20 minutes). Because wrapping paper is so thin, I knew that any sort of glue would result in wrinkles in the paper. Placing some tape on the picture, I put the wrapping on in strips, tucking the edges under the frame. I used the pencil markers to make sure the seams in the paper were hidden under the molding.

After deciding how far apart to space the hooks for the jewelry, I marked every 3″ on the strips, staggering the middle strip by 1.5″. I made holes over the marks with a nail. If you try to screw the hooks straight in, you risk splitting the wood *no good.


The hooks I found at the hardware store were simple 5/8″ hooks, which was appropriate for the width of the wood. I screwed each one into the holes in the wood. (Please note: this is much easier to do with pliers, which we did not have and ended up with red, aching fingers.)

Once all of the hooks were good to go, I glued the strips to the edges of the frame with liquid nails. You’ll definitely want to use a similar product for this step to avoid the strips crashing down and breaking your project. Let the project sit and dry for at least an hour, and definitely over night before hanging anything from it. Once everything has set, mount it on your wall and fill it with your loveliest jewelry!

To make this project at home, you’ll need:
Old picture frame
Strips of plywood/molding cut to fit just inside the frame
Hooks
Paper for the background
Acrylic paint
Double stick tape
Liquid nails
Nail/Hammer
Pliers

You could try making this with a different frame shapes and color schemes. You could also opt to paint the background, rather than use patterned paper. Make sure to send a picture my way if you make your own!

Happy Crafting!

Leave a Reply

Your email address will not be published. Required fields are marked *